http://www.iart3d.com

HomeBrew3D

"HomeBrew3D" is a 3D display, rather than a 3D kit, basically prepared for those who would like to do autostereoscopic applications and can't afford the high price of autostereoscopic display. It is more like a 3D kit put on a specific LCD monitor. Not only can you use it as a 3D display but also its 3D lens can be lifted up for normal display use. It would be great for engineering (or educational) study and research purposes. If you have the limited budgets (or would like to have 2D/3D switchable 3D lens) for the 3D display, then it would be your optimum choice.

Currently, what we can offer the HomeBrew3D is as follows.

LCD Monitor
LCD Dot Pitch
LCD Resolution
Viewing Distance
View Count
Primary Viewing Angle
Supported By Auto3D Driver
21.5"
0.248mm
1920x1080
1.0m ~ 4.0m
9
9°
N/A
22"
0.282mm
1680x1050
1.0m ~ 4.0m
9
9°
Yes
22"
0.246mm
1920x1080
1.0m ~ 4.0m
9
9°
N/A
23.6"
0.272mm
1920x1080
1.0m ~ 4.0m
9
9°
N/A
24"
0.277mm
1920x1080
1.0m ~ 4.0m
9
9°
N/A
24"
0.270mm
1920x1200
1.0m ~ 4.0m
9
9°
N/A

Product Features:

  1. 2D/3D Switchable
    By lifting up/down 3D lens, you can use it as a normal LCD monitor and 3D display as well.
  2. Low Cost
    Without high price of commercial 3D display, you can afford it at limited budgets.
  3. High Quality
    With the same 3D lens as our Auto3D Display has, there is no distortion on 3D quality.
  4. High Resolution
    Supports the display resolution of up to Full HD (1920x1080).


Primarily inside the package:

  1. HomeBrew3D Display (with 3D Lens well installed) x 1
  2. Auto3D Maker Package x 1
  3. Auto3D Player & DEMO CD  x 1
  4. Hardware Security Dongle   x 1


Recommended System Requirements:

  1. Pentium 4 / 3.0G or Higher System
  2. RAM 512MB or Higher
  3. Windows XP/Windows 7

3D Lens can be lifted up/down for 2D/3D switchable display use.
(Note: The LCD Monitor will be subject to change without prior notice.)